Your Real Estate Professionals In Spain
Audifans.net: Audi Forums

www.audifans.net :: Search
 
 Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Search found 66 matches
www.audifans.net Forum Index
Author Message
  Topic: VCDS coding help
MAK

Replies: 0
Views: 667

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Wed Sep 05, 2018 6:39 am   Subject: VCDS coding help
I need to replace the alarm siren. I have bought a genuine replacement with the same part number. I would have thought that as I was replacing with same part number everything should be OK. The selle ...
  Topic: Water leaks into right side of boot by wing
MAK

Replies: 3
Views: 6243

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sun Jul 26, 2015 5:25 pm   Subject: Water leaks into right side of boot by wing
Audi 80 B4 1995
Water is leaking into right hand side of boot and soaking central locking pump. Would it be the main boot seal leaking or the rear light seals, inner or outer or perhaps the boot loc ...
  Topic: Esp warning light on
MAK

Replies: 0
Views: 4924

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Sun May 17, 2015 11:13 am   Subject: Esp warning light on
Audi A3 8pa 5A BKC 1.9tdi
Esp warning light on and vcds diagnostics shows: 00493-Esp-Sensor Unit (G419) 004-No signal/communication. Could you please tell me where this sensor is on my rhd car so ...
  Topic: Loss of electric power
MAK

Replies: 3
Views: 3119

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Thu Nov 13, 2014 12:31 pm   Subject: Loss of electric power
Audi 80 B4 ABK
Went for a short trip, parked up and came back after an appointment. Car started OK but did not have any power to indicators, wipers and heater fan. A very worrying trip home. As I ...
  Topic: Timing belt renewal, right-hand engine mounting change over
MAK

Replies: 0
Views: 4008

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Sun May 11, 2014 9:43 am   Subject: Timing belt renewal, right-hand engine mounting change over
I have an Audi A3 8PA 1.9tdi BKC 2005my which now needs the timing belt replaced. I understand that a modified right-hand engine mounting was introduced in 2005 making it unnecessary to remove the mo ...
  Topic: Changing front dics and pads
MAK

Replies: 1
Views: 4834

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Fri Feb 14, 2014 2:30 pm   Subject: Changing front dics and pads
Audi A3 8PA 2005
Need to change front discs and pads. As discs have an outer lip it's difficult to extract pads so would normally push in caliper piston with the bleed valve open and brake hose clamp ...
  Topic: Help with 80 2.0E ABK(engine) timing belt change
MAK

Replies: 3
Views: 5986

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Tue Jan 14, 2014 4:18 pm   Subject: abk engine vin s18000
Alan,
Forgive me for getting in touch but was wondering if you could also email me the Autodata details for changing the timing belt on the ABK engine vin S_18000. Tensioner has just broken and timi ...
  Topic: Audi 8PA 1.9tdi Glow plug connectors breaking up...help plea
MAK

Replies: 1
Views: 3138

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Sun Dec 30, 2012 1:32 pm   Subject: Audi 8PA 1.9tdi Glow plug connectors breaking up...help plea
Just changed the glow plugs on my BKC engine but noticed that the connectors are breaking up. It is the sleeve bit that fits over the glow plugs. I think I still have the connection to the top of the ...
  Topic: audi 80 (B4 8C) replacing brake pipe.
MAK

Replies: 2
Views: 2201

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Tue Nov 20, 2012 8:34 am   Subject: audi 80 (B4 8C) replacing brake pipe.
Many thanks for that Mike
  Topic: audi 80 (B4 8C) replacing brake pipe.
MAK

Replies: 2
Views: 2201

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sun Nov 18, 2012 9:00 am   Subject: audi 80 (B4 8C) replacing brake pipe.
Some advise please. Replacing flexible brake hoses and there is one I cannot undo, OS rear axle at the pressure regulator end. Seems I will have to remove this section of brake pipe together with hose ...
  Topic: Audi 80 B4 2.0E 1995my Door mirrors not heating
MAK

Replies: 1
Views: 1469

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Thu Jan 19, 2012 11:01 am   Subject: Audi 80 B4 2.0E 1995my Door mirrors not heating
Hope someone can help, both door mirrors have just stopped heating up although they both still adjust by the switch. Always felt that they heated upon car starting but have also tried rear window swi ...
  Topic: Headlight glass replacement
MAK

Replies: 5
Views: 3415

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Tue Aug 23, 2011 8:58 am   Subject: Headlight glass replacement
Sorry I should have stated that the car is a 2.0E 4 cylinder ABK engine. I bought one of these a very long time ago, from GSF I think, but the local suppliers do not have them now. I will keep a loo ...
  Topic: Headlight glass replacement
MAK

Replies: 5
Views: 3415

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Mon Aug 22, 2011 3:05 pm   Subject: Headlight glass replacement
Hello there,
Does anyone know where I can get a replacement glass lens for the Bosch headlight, n/s (left)? Audi 80 1995 model.
Many thanks
  Topic: Disconnecting wiring multi-plugs
MAK

Replies: 2
Views: 2449

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sun Apr 17, 2011 11:53 am   Subject: Disconnecting wiring multi-plugs
1995 mdl Audi 80 2.0E ABK
I need to remove the instrument panel and need advise how to disconnect the wiring multi-plugs from the rear. They appear to have a mauve locking tab on top but I could be ...
  Topic: Gearbox drain plug, what size tool bit?
MAK

Replies: 2
Views: 1980

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sat Aug 23, 2008 1:58 pm   Subject: Gearbox drain plug, what size tool bit?
Hi all,
Audi 80 2.0E 1995 model.......Could some one please tell what size TX-Star bit is required to undo the 'tamperproof' drain plug on the gearbox. It is definitly TX-Star with a nobbly bit in th ...
  Topic: Heated Windscreen Washer Jets, how do you test these?
MAK

Replies: 2
Views: 1149

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sat Dec 01, 2007 12:19 pm   Subject: Heated Windscreen Washer Jets, how do you test these?
Hello all,
This may be a silly question to some but can anybody tell me how can I test my heated windscreen washer jets to see if they are still 'heating'. Just getting ready for winter.
My car is ...
  Topic: ABS light while not braking
MAK

Replies: 4
Views: 2457

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Tue Jul 03, 2007 7:12 pm   Subject: ABS light while not braking
Sorry for replying to an old query, but interested to know who JKM in Portsmouth are and there whereabouts. As this is my domain, keen to know for the future.
Many thanks,
Martin
  Topic: Is this high mileage for a diesel?
MAK

Replies: 2
Views: 1839

PostForum: A1, A2, A3, S3, RS3 and TT Forum   Posted: Tue Jul 03, 2007 6:55 pm   Subject: Is this high mileage for a diesel?
Hello all,
Have an opportunity to purchase an A3 1.9TDI 100bhp SE 2003/03 which is in vgc with FSH but concerned about the high mileage, 112,000miles. Although this will be taken into account with t ...
  Topic: Which strut top mounting?
MAK

Replies: 10
Views: 3716

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Tue Jun 19, 2007 2:30 pm   Subject: Which strut top mounting?
Thanks everbody for your replies.

I will definitely get them from the dealers as the GSF replacements have only lasted 3 years/9000 miles.

My local dealers are charging £10.00 plus VAT each, see ...
  Topic: Which strut top mounting?
MAK

Replies: 10
Views: 3716

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sun Jun 17, 2007 11:15 am   Subject: Which strut top mounting?
Hello all,
I have an Audi 80 2.0E Sport 1995my (8C,B4) with Audi sport suspension, ABK engine.
My problem is to do with the correct part no. for the suspension strut support mounting. I have been ...
  Topic: Which grease for steering bellows?
MAK

Replies: 3
Views: 1561

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Fri Apr 20, 2007 12:12 pm   Subject: Which grease for steering bellows?
Hello all,

Have a 80 2.0E 1995my with PAS and the steering 'groans' when turning left at a slow speed. I was wondering if the grease within the bellows needs topping up/replacing. Does anyone kno ...
  Topic: Central locking pump, which replacement?
MAK

Replies: 3
Views: 3379

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Wed Apr 04, 2007 10:23 am   Subject: Central locking pump, which replacement?
Can anybody help me????

Desperate,
Martin
  Topic: Central locking pump, which replacement?
MAK

Replies: 3
Views: 3379

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Mon Apr 02, 2007 11:37 am   Subject: Central locking pump, which replacement?
Hello all,
I need to replace my central locking pump with alarm OE 4AO 862 257F but have noticed that on ebay there are others available namely 'J' instead of 'F'. This has the same three connection ...
  Topic: Audi 80 1995 2.0E, Central locking pump problem.
MAK

Replies: 1
Views: 1914

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Wed Feb 28, 2007 10:23 am   Subject: Audi 80 1995 2.0E, Central locking pump problem.
Hello there,
I hope someone can help me, the central locking pump is not opening all the doors/boot. Only the door/boot on the key opens. Strangely it is closing everything, you can hear it working, ...
  Topic: audi 80 2.0E 1995 model - Goodridge Brake Lines help req
MAK

Replies: 0
Views: 1115

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Sat Nov 18, 2006 5:10 pm   Subject: audi 80 2.0E 1995 model - Goodridge Brake Lines help req
Hello there,
Can anybody help me concerning fitting Goodridge Brake Lines replacements. I thought it about time to replace the original rubber lines although they appear OK externally.
I purchased ...
  Topic: Part numbers please
MAK

Replies: 1
Views: 1061

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Thu Sep 21, 2006 10:26 am   Subject: Part numbers please
Hi all,

Is it possible somebody has the part numbers for the hexagon bolt (m10 x 7Cool and the self locking nut (m10) for fixing the the wishbones (tracking arms) on an Audi 80 1995 model 2.0E....... ...
  Topic: Audi B4, Part number of front wheel bearings please.
MAK

Replies: 2
Views: 1309

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Mon May 22, 2006 2:01 pm   Subject: Audi B4, Part number of front wheel bearings please.
Hello all,
Audi 80 2.0E 1995 model, 8C SA18000

Could someone please inform me of the VAG part no. for the front wheel bearings so that I can verify a soon to be made purchase from GSF.
Many than ...
  Topic: Audi 80 2.0E 1995MY 105K miles, Unbalanced driveshaft noise?
MAK

Replies: 2
Views: 1663

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Mon Apr 03, 2006 2:51 pm   Subject: Audi 80 2.0E 1995MY 105K miles, Unbalanced driveshaft noise?
Thanks Scotty33 for your opinion, I must admit I didn't quite appreciate the force placed on just a small area of the bearing. Will now change both.
Thanks again,
Martin
  Topic: Audi 80 2.0E 1995MY 105K miles, Unbalanced driveshaft noise?
MAK

Replies: 2
Views: 1663

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Tue Mar 28, 2006 4:36 pm   Subject: Audi 80 2.0E 1995MY 105K miles, Unbalanced driveshaft noise?
Hello there,
I hope somebody can help me. My problem is a ‘rhythmic rumble’ coming from the front of the car when driven. The local MOT tester said it was definitely transmission and not tyre noise w ...
  Topic: audi 80 2.0E 1995 abk 8C-S , Replacing Flexible brake hoses.
MAK

Replies: 8
Views: 3929

PostForum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2   Posted: Tue Feb 21, 2006 3:48 pm   Subject: audi 80 2.0E 1995 abk 8C-S , Replacing Flexible brake hoses.
Many thanks for all your responces especially Beerbelly for the part nunbers and Ian re the spanner.
Much obliged and just hope the job goes smoothly Very Happy . If not, I could be back Sad .
Once again, m ...
 
Page 1 of 3 Goto page 1, 2, 3  Next
All times are GMT
Jump to:   

Forums ©