O/S drivers door

Newbie Joined: Jun 28, 2014 Posts: 1

Hi guys i have Audi A3 Quattro which I have just purchased as I drove it home the wind was blowing through the door seal is their a way that the door can be adjusted as it isn't sitting right when closed theirs a 5mm gap across the top of the door I have made sure the hinge bolts are tight which they wasn't I have even adjusted the latch but it makes hard work for shutting the door as you have to slam it which isn't a good look so if any one has any info on how to correct this I would appreciate it very much .

Posted: Sun Jun 29, 2014 9:30 pm

You can adjust the whole window frame on it. Remove door card and you will find 4 large torx head bolts, 2 top and 2 bottom.
They all have wedge shaped adjusters between door frame and window frame, slacken the bolts an push the bottom wedged to the fattest part and thinnest on top. That will bring top of door intowards the roof.